Teac TN-400S-MR Matte Bordeaux 3-Speed Turntable w/ Built-in Phono Amp

by Teac
Sold out
SKU TEA-TN-400-MR
Checked Fast Shipping on all US Orders
Checked Contact Customer Service Representative for more info
Checked Buy Online, Free Local Pickup
Teac TN-400S-MR Matte Bordeaux 3-Speed Belt Drive Turntable w/Built-in Phono Amp

Brand:
Teac
MPN: TN-400S-MR
Condition: New

Three-Speed Turntable plays all the hits – both old and new
Aluminum Die-cast Platter and upgraded motor assembly provide years of service and stability
Newly designed, low-friction spindle reduces platter drag, resulting in enhanced speed consistency and tonal accuracy
Integrated USB Port for Digital Output allows PC Recording for easy archiving
Anti-skating Mechanism stays in the groove so you can stay in the groove
Static-balanced S-shape Tone-arm with Universal Head-shell for improved tracking
Built-in Phono EQ Amplifier and Switchable Phono/Line Outputs ensures easy setup with any Amp or Receiver
High-density MDF Chassis dampens vibrations and delivers rock solid performance
Detachable Dust Cover enables you to customize the experience to fit your own personal style
Upgraded Audio-Technica AT100E equivalent MM equivalent cartridge for accurate and detailed sound reproduction

TN-400S Owner's Manual: http://www.teac.com/content/downloads/products/969/tn-400s_om_jefsginlsv_vb.pdf

Turntable Sections
Drive System:
Belt Drive
Motor: DC Motor
Speed: 33 1/3 RPM, 45 RPM, 78 RPM
Rotation Speed Variation: +/–2%
Wow and Flutter: 0.2%
Signal-to-Noise Ratio: 67dB or higher (A-weighted, 20kHz LPF); 60dB or higher (unweighted, 20kHz LPF)
Platter: Aluminum Die-cast
Diameter of Platter: 12", 30cm

Tonearm Section
Type:
Static Balanced, S-shaped
Effective Arm Length: 8.8", 223mm
Stylus Pressure Range: 0 to 5g
Supported Cartridge Weight: 3.5 to 6.7g; 13.5 to 16.5g (including head shell)
Anti-skating Adjustment: Supported

Cartridge Section
Type:
MM type (audio-technica AT100E factory installed)
Stylus Shape: Joint-oval 0.3 x 0.7 mil
Stylus Construction: Bonded Round Shank
Mount: Half inch
Frequency Response: 20Hz to 20kHz
Channel Separation: 27dB at 1kHz
Output Balance: 1.5dB
Needle Pressure: 1.0 to 1.8g (approximate value 1.4g)
Vertical Tracking Angle: 23 degrees
Supported Load Impedance: 47k ohms
Output Voltage: 4.5mV (1kHz, 5cm/sec.)
Cartridge Weight: 6.5g
Replacement Stylus: audio-technica AT100E

Phono Equalizer Amplifier
Type of Amplifier:
MM type (On/Thru switchable)

Analog Output
Connector:
RCA Pin jack (Gold-plated)
Output Voltage: Phono/Line switchable
Phono Output: 4.5mV (± 3dB)
Line Output: 230mV (–13dBV)

USB Output Section
Connector:
USB B type
Output Signal: PCM 48kHz/16-bit
Supported OS: Windows 7, Windows 8, Windows 8.1, Windows 10, OS X Lion (10.7), OS X Mountain Lion (10.8), OS X Mavericks (10.9), OS X Yosemite (10.10), OS X El Capitan (10.11), macOS Sierra (10.12)
Power: AC 100 to 240V, 50/60Hz
Power Consumption: 1.5W (less than 0.5W at Standby)
Overall Dimensions (W x H x D): 16.5" x 4.6" x 14.0" (420 x 117 x 356 mm)
Weight: Approx. 10.8 lbs. (4.9 kg)

Turntable
Felt Mat
EP Adapter
Counter Weight, Head-shell (audio-technica AT100E equivalent installed)
Turntable (Platter)
Dust Cover
Dust Cover Hinges
RCA Audio Cable with GND wiring
AC Adapter (GPE053A-V120050-Z)
Owner’s Manual (including Warranty Card)

You recently viewed

Clear recently viewed