Skip to content

PulseAudio PA-EXTDA Digital to Analog Audio Extender Over CAT5e CAT6 Ethernet

Low stock

PulseAudio PA-EXTDA Digital to Analog Audio Extender Over Ethernet CAT5e or CAT6 Network

Do you want to enjoy high-quality audio from any source and any device in your home or office? If so, you need the Vanco PulseAudio Digital-Analog Audio Extender. This device lets you transmit digital and analog audio signals over a single category cable, such as Cat 5e/6/7, up to a long distance. You can connect your audio sources, such as a TV, a Blu-ray player, or a computer, to the transmitter using TOSLINK, COAX, or 3.5mm analog inputs. Then, you can connect your audio devices, such as a soundbar, a speaker system, or a headphone amplifier, to the receiver using TOSLINK, COAX, or L/R RCA pair outputs. The device supports PCM, DTS, and Dolby audio formats, so you can enjoy crystal-clear sound with no loss of quality. The device also features power over cable (PoC) technology, which means you only need to plug in the receiver to power both units. The PulseAudio Digital-Analog Audio Extender is the perfect solution for extending your audio signals without compromising on quality or convenience.

  • Analog audio extension over a single Cat5e/6 via 3.5mm connection
  • Digital audio extension over a single Cat5e/6 via Toslink and/or Coax connection
  • Inputs can be manually switched
  • Three audio synchronous outputs: TOSLINK, COAX & RCA (L+R)
  • Supports PCM, DTS, and Dolby audio formats
  • POC technology allows Transmitter to be powered up by the Receiving unit for easy installation
  • Transmits analog audio signals up to 557ft/170m over a single CAT5e/6 cable
  • Transmits digital audio signals up to 951ft/290m over a single Cat5e/6 cable