Metra 95-3318B Black 2-DIN Dash Kit for Select 13-up Chevrolet Malibu

by Metra
In Stock
SKU MET-95-3318B
Checked Fast Shipping on all US Orders
Checked Contact Customer Service Representative for more info
Checked Buy Online, Free Local Pickup
Metra 95-3318B Black 2-DIN Dash Kit for Select 13-up Chevrolet Malibu

Brand: Metra
MPN: 95-3318B
Condition: New


ISO Double DIN radio provision with pocket
Painted black to match the factory dash
Retains the factory personalization menu and climate controls status
Retains OnStar
Prewired ASWC-1 harness included (ASWC-1 sold separately)
Compatible with 2013-up Chevrolet Malibu Vehicles with Automatic Climate Controls
Includes (1) One Radio trim panel, (2) Two Brackets, (1) One Pocket, (4) Four #8 x 3/8" Phillips screws, (2) Two White panel clips, (1) One Axxess interface, (1) One 3318 harness, (1) One 18-pin harness with stripped leads, (1) One 20-pin gray harness, (1) One 4-pin to 4-pin resistor pad harness and (1) One Installation Instructions
Panel removal tool, Phillips screwdriver, Socket wrench (9/32"), Cutting tool, Crimping tool, Tape and Connectors (example: butt-connectors, bell caps, etc.) Tools Needed (sold separately)
Authorized Dealer

Note: The Rearview Camera Input is used to display the Personalization Menu and the Climate Control status. If the aftermarket radio does not have a screen with a Rearview Camera Input, then there will be no visualization of the Climate Controls Status or Personalization Menu. An externally mounted screen could be substituted in this situation

Compatible With
Chevrolet Malibu with Automatic Climate Controls 2013-up

Note: The Rearview Camera Input is used to display the Personalization Menu and the Climate Control status. If the aftermarket radio does not have a screen with a Rearview Camera Input, then there will be no visualization of the Climate Controls Status or Personalization Menu. An externally mounted screen could be substituted in this situation

Wiring & Antenna Connections (sold separately)

Wiring Harness: Axxess interface included
Antenna Adapter: 40-EU55

Tools Needed (sold separately)
Panel removal tool
Phillips screwdriver
Socket wrench (9/32")
 Cutting tool
Crimping tool
Tape
Connectors (example: butt-connectors, bell caps, etc.)

(1) One Radio trim panel
(2) Two Brackets
(1) One Pocket
(4) Four #8 x 3/8" Phillips screws
(2) Two White panel clips
(1) One Axxess interface
(1) One 3318 harness
(1) One 18-pin harness with stripped leads
(1) One 20-pin gray harness
(1) One 4-pin to 4-pin resistor pad harness
(1) One Installation Instructions

You recently viewed

Clear recently viewed