Skip to content

Klein Tools ET40 Electronic AC / DC Voltage Tester and DC Polarity /w Batteries

Klein Tools ET40 Electronic AC / DC Voltage Tester and DC Polarity /w Batteries
Availability:
Out of stock
SKU KLE-ET40
Sold out
Klein Tools ET40 Electronic AC / DC Voltage Tester and DC Polarity, Includes Batteries

Brand: Klein Tools
MPN: ET40
Condition: New

Klein Tools ET40 is an Electronic AC/DC Voltage Tester. It features indicators for positive and negative DC polarity, and tests DC voltages as low as 1.5V. It tests AC voltages 12-240VAC. Excellent for checking, verifying or troubleshooting common residential electrical wiring in electrical outlets, light fixtures, doorbells and more. It operates on 2 x AAA batteries.

- Tests AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages
- Tests DC voltages from 1.5V to greater than 17 to 24V at four useful levels aligned with commonly used DC voltages
- Bright LEDs illuminate to indicate the type and level of voltage detected
- Built to withstand a 9.9-Foot (3 m) drop
- Indicates polarity when measuring DC voltages
- Powers off automatically after approximately 2 minutes of non-use to conserve battery life
- CATIII 250V, Class 2, Double insulation
- Ingress protection IP41 dust and water resistant
- Built-in test lead holders on sides of tester
- Low battery indicator with easily accessible battery compartment
- Pocket clip secures tester to pocket for reliable everyday carrying
- Uses 2 x AAA batteries (included)
- Identifies and distinguishes between AC or DC voltage


SPECIFICATIONS

Application: Measures AC/DC voltage
Special Features:
 DC Polarity Indicators for DC Positive, DC Negative, and Both Illuminated for AC. Tests Low DC Voltage to 1.5V. Built in Test Lead Holders on Sides of Tester.
Material:
 Plastic Housing, PCB with Electronic Components
Batteries:
 2 x AAA
Drop Protection:
 9.9' (3.0 m)
Display:
 Analog LED
Control Type:
 ON/Off Switch for Power ON/OFF
Voltage:
 AC Level Indicators: 12V, 24V 120V, 240V and DC Indicators:1.5V, 9V, 12V, >17-24V
Frequency:
 50/60 Hz
Ingress Protection:
 IP41
Pollution Degree:
 2
Tests Continuity:
 No
Integral Lead Storage:
 Yes
Interchangeable Leads:
 No
Lead Length:
 9'' (228.6 mm)
Standard:
 CATIII 250V, CE
Case Included:
 No
Included:
 Tester, User Manual, and 2 x AAA Batteries
Weight w/Batteries:
 3.1 oz (90 g)
Overall Length:
 5.24'' (133.0 mm)
Overall Height:
 1.52'' (39.0 mm)
Overall Width:
 1.11'' (28.0 mm)
Weight:
 2.3 oz (66g)