Skip to content

Niles CM8MP 8-in 2-Way In-Ceiling Multi-Purpose Loudspeaker

Availability:
Out of stock
SKU NIL-CM8MP
Sold out
Niles CM8MP 8-in 2-Way In-Ceiling Multi-Purpose Loudspeaker

For Multi-Purpose Applications and non-primary listening areas
For Left/Center/Right Ceiling Mount Loudspeaker
8" polypropylene woofer
Butyl rubber surround
3/4" fluid-cooled ultra-wide dispersion Kaladex tweeter in a custom pivoting coaxial enclosure
Proprietary bridge-mounted tweeter-adjustment mechanism
Magnetically attached, rust-resistant grille
Low profile look
Weather-resistant construction

Caution: Be very careful not to saw through existing wires, pipes or structure. If you feel extra resistance as you are cutting, STOP.

Woofer: 8” Black Glass Fiber Tight Weave woofer cone
Woofer Size: 8 (Inches)
Tweeter/Midrange: 1” Ultra Silk
Tweeter Adjustment: Up to 20° pivot angle
Sensitivity: 89dB for 2.83 volts of Pink Noise
Frequency Response: 55Hz to 20kHz, +/- 3dB (on axis)
Recommended Amplifier Power: 5-100 watts per channel
Normal Impedance: 8 ohm nominal; 6 ohm minimum
Overall Exterior Frame Dimensions: 10-5/8" diameter
Depth Behind Wall: 3-3/4" deep (based on 1/2" drywall)
Hole Cutout Dimensions: 9 3/4" (24.8 cm)

Wiring Requirements (sold separately):
16 to 18 gauge stranded wire for up to 80 feet
14 gauge stranded wire for up to 200 feet.
Connectors accommodate 12 to 18 gauge stranded wire.

Tools required (sold separately):
Cordless screwdriver
Measuring tape
Painters tape
One inch #2 Phillips tip
Stud finder
Drop cloth
1/8” Drill bit
Spackle
Optional - a 24” x 24” piece of R19 insulation
Drywall saw
Wire stripper
Laser plumb bob
Cable ties
12” -14” Coat hanger wire
Pencil

(1) Niles CM8MP Loudspeaker
(1) Magnetically attached round grill
(1) Hole template with painting standoffs